The body shape is designed by computer, and the torque of the worm gear and the life of the bearings are calculated using modern and precise technical procedures. Such high quality of the product is due to the use of technologies specifically designed for the consistency of performance parameters and strict inspection of the product manufacturing and finished products.

The overall shape of the worm gear is bronze "ZI" type. This shape improves the continuity and vibration amplitude of the reducer, and the torque transmission can also be gentle and gradual. The operation of the reducer is silent and vibration-free.

The reducer chassis is produced using modern die-casting technology and is made of aluminum. The smoothness of the chassis surface makes it unnecessary to paint the chassis, because we do not paint the chassis. Beautiful appearance and good performance are combined. The die-cast chassis is equipped with a reinforcement frame, but it does not change the weight of the body and ensures the strength, hardness, surface and heat dissipation of the chassis.

From size 75, a tapered roller shaft is used as the input shaft, which makes the adjustment of the backlash easier. In this way, the radial and axial loads on the input shaft are significantly improved. The reducer operates in a silent and vibration-free state, no adjustments are required, and the need for maintenance is greatly reduced. Tapered roller shafts can also be used as output shafts if required.

All worm reducers in the I-MI series are lubricated with a lifetime lubricant specified by SITI, with synthetic oils replacing conventional lubricants. The use of synthetic oils can improve efficiency under limited conditions.

The reversibility and irreversibility of the worm reducer can be changed as a function of the optional structural parameters. Sometimes some special applications require its reversibility, while other cases require irreversibility. In order to solve the customers detailed and specific needs, it is recommended that you contact SITI Engineering Department.

This product is silent and vibration-free in all operating states. Compared with other worm reducers, it is a highly efficient product and suitable for large workloads.

• Input power 0.09kW ~ 54.91 kW
• Output torque 2 ~ 4400 Nm
• Reduction ratio 7.5/1 ~ 100/1; 75/1 ~ 400/1; 400/1 ~ 4000/1